Elvstrøm Sails 13

Layout: Cross-cut
Material: Dacron Radial
Performance: 3.5
Durability: 9.0
Price: 6.5
Performance chart:
Product Image:

A trioptimal cut sail in woven polyester cloth. This is a reasonable alternative for cruising and small to medium-sized boats where durability is one of the most important parameters. Performance is higher than with a crosscut sail.

Materials

Browse through the list of materials and find more information on the combination for the selected sail.

  • Aramid-Kevlar Fiber
  • Carbon Fiber
  • Dyneema Fiber
  • Nylon Fiber
  • Polyester Fiber
  • Technora Black Fiber
  • Vectran Fiber
  • Woven Polyester Fabric (Dacron)
  • Taffeta Fabric
  • LiteSkin, grey Fabric
  • LiteSkin, white Fabric
  • Nylon Fabric
  • Aramid-Kevlar Fiber

    Aramid-Kevlar Fiber

    Kevlar is stronger than steel – and lighter. Different kinds with different characteristics. Type 29 better in flex than type 49. Type 49 50% better in stretch than 29. Twaron is very similar to type 49. Technora is between 29 and 49, is available in black and gold.

    5 times better stretch than Polyester, double that of Pentex. Aramide yarns can be woven to a tight fabric and bonds well on Mylar.

    Aramids have only moderate UV resistance, and poor with repeated flex. Technora is somewhat better in both these issues.
  • Carbon Fiber

    Carbon Fiber

    Carbon consists of mainly carbon atoms. Each fibre consists of hundreds to thousands of filaments (tubes) with a diameter of few micrometers.

    Different types with almost zero stretch to those with better flexibility.

    Extremely low stretch and insensitive to UV. Can use less fibre for same strength – saves weight.
  • Dyneema Fiber

    Dyneema Fiber

    Dyneema has extremely long molecular chains, therefore enormous breaking strength.

    Very strong, and resistant to stretch. Good resistance against UV and material fatigue, very light.

    Under permanent load the fibre tends to elongate, so the sail can change shape under high loads of long duration.
  • Nylon Fiber

    Nylon Fiber

    Yarns and fabrics called Nylon derive from the Brand name of Du Pont, but never copyrighted, therefore used generically for all thermoplastic polyamides.

    Very light, elastic - good break load. Good against chafe and flex. Therefore ideal for downwind sails.

    Stretch resistance not good enough for upwind sails.UV and moisture reduces its strength.
  • Polyester Fiber

    Polyester Fiber

    Woven Polyester fabrics have been used for more than 60 years as sailcloth.

    Polyester is very durable. Good against UV. Economical. For high performance sails stretch resistance is not good enough.
  • Technora Black Fiber

    Technora Black Fiber

    High performance fibre usually used in laminates and membranes.

    High Tenacity. Low elon-gation. Good flex/fold characteristics. No creep. Moderate UV resistance (better than golden Aramid).
  • Vectran Fiber

    Vectran Fiber

    Vectran is based on polyester with aramid type molecular structure to combine the pros of both materials. Vectran is a quasi-polyester. Colour is gold.

    Vectran has good stretch resistance and does not deteriorate in use. UV resistance is better than Aramid, suitable for use on performance cruiser with main emphasis on durabilty.

    Flex resistance is better than Aramid. It is not as stretch resistant as Aramid.
  • Woven Polyester Fabric (Dacron)

    Woven Polyester Fabric (Dacron)

    Woven polyester fabrics are developed to a very high standard. Polyester is the most used sailcloth, known as Dacron, Tetoron, Terylene, Trevira and Diolen too.

    A very durable fabric, good against UV, flex and economical. Suitable for sails requiring durability.
  • Taffeta Fabric

    Taffeta Fabric

    Technically, Taffetas are all types of fine, light woven fabric (for example silk). Taffeta for sail production are tight woven polyester as layer on laminates for better resistance against UV, tear, flex and chafe.

    Taffeta can also be used inside two layers of film for a better flex.
  • LiteSkin, grey Fabric

    LiteSkin, grey Fabric

  • LiteSkin, white Fabric

    LiteSkin, white Fabric

  • Nylon Fabric

    Nylon Fabric

    Nylon can be woven very tight, fabric is light and strong.

    Very light, good breaking load. Good against flex and chafe therefore ideal for downwind sails.

 

Cruising stories

  • Pirates of happiness

    Pirates of happiness

    Babsi Holler and Eric Merten, a couple from Germany, has started out an interesting journey. Not just to live out their own dream, but also to inspire and motivate others to do the same.

  • Long-distance sail set-up

    Long-distance sail set-up

    There is a lot to take in to consideration when deciding what kind of sail set-up you should have on your boat for long-distance cruising.

  • 55,000 NM with our sails

    55,000 NM with our sails

    This summer 3,500 miles from Denmark, up the Norwegian coastline to the North Cape and back. Georg Noske from Garmisch-Partenkirchen, Bayern, Germany is not a Mr. average sailor.

  • Stroke of Luck

    Stroke of Luck

    It certainly wasn’t part of the plan, when on Monday 9th July Johnny Kirk and Gert Hulevad from Ishøj, Denmark docked at Aabenraa.

  • Aalregatta 2014

    Aalregatta 2014

    Thomas Nielsen from Yachtsport Eckernförde took part in the Aalregatta from Kiel to Eckernförde in his Saare 41ac, which is a genuine cruiser. Nevertheless he came in as number 7 out of 131 participants and within the “yardstick mit Spi” and over all he won the race.

  • Follow Niels Birkemose

    Follow Niels Birkemose

    Choosing sails can be a quite a question.

    What material should you choose, what shape and what look do you want. Do not let the price alone choose for you.

  • Like getting a new boat

    Like getting a new boat

    Like getting a new boat  

    This is how Jürgen Gideon, Niedersachsen, Germany speaks in favour of the FatFurl design:

  • Pursuing an idea


    Pursuing an idea


    Inspired by a book, Morten Friis and his family went sailing for a long time! 

  • Cruising with SWAN-38

    Cruising with SWAN-38

    Eight years ago Silke Löffler-Andrews from Eckernförde, Germany bought CARISSIMA, a SWAN-38, built in 1976. „The yacht is a beauty, it was love at first sight“, Silke tells.

  • Havana´s spiler

    Havana´s spiler

    Vi glæder os til at se Havana i 3. Sæson af Kurs mod Fjerne Kyster med spritny 178m2 spiler fra vores loft i Aabenraa. Eventyr, drømme, frihed, sammenhold er vist blot nogle af de ord, der tryllebinder et rekordstort antal danskere, når Kurs mod Fjerne Kyster ruller over skærmen i de danske stuer.

  • Circumnavigation

    Circumnavigation

    In 2004 the Danish singlehand sailor Jan Moeller succeeded in being the first Scandinavian to circumnavigate the globe without stopping underway – a tough challenge for the man his equipment.

  • Living life to its fullest

    Living life to its fullest

    This story is about Dirk Mertens from Belgium. With a background in law and economics he is today a private investor at the age of 65, lives in Antwerp on a farm, breeding Grand Prix horses. But the real essence is a story about a man who seems to be living his life to the full – loving to sail!

  • Probesegeln Dufour

    Probesegeln Dufour

    Schönes Wochenende! Dufour 500 Grand Large mit:

  • Bavaria 46V with EPEX

    Bavaria 46V with EPEX

    The new EPEX GLP membrane for high performace cruising and clubracing has a greyish look and a soft and ruggy surface.

  • En solstrålehistorie

    En solstrålehistorie

    Fantastisk at se, hvordan projektet er lykkedes for Anders, som Elvstrøm Sails første gang havde kontakt med cirka 10 år tilbage.

facebook_page_plugin