• Alisio

    Det er fredag og solen skinner! Du ser frem til nogle afslappende
    timer på vandet med familie og gode venner, uden de store bekymringer
    om trim og håndtering af sejl. ALISIO er en din holdbare sejlgarderobe.
    til simple living – og hygge! Sail away! Vores ALISIO sejl er designet
    med øje for komfort og nem håndtering.

Forskellige layouts

  • X-CUT
  • TRIOPT
  • EPEX
  • X-CUT
    Et crosscut (x-cut) sejl består af et antal horisontale parallelle paneler i lodret linje mod agterliget. Det er en effektiv og økonomisk måde at producere holdbare sejl på. Som det første sejldesign på markedet har det bevist sit værd. Crosscut sejl fremstilles typisk af vævet polyester dug med lige skudtråde, der er stærkere end kædetrådene. De stærke skudtråde ligger i belastningsretningen af sejlet og giver dermed et meget holdbart sejl.
  • TRIOPT
    Det trioptimale layout går også under navnet radial, da panelerne er radiale mod hjørnerne af sejlet, der giver den triangulære facon. Sejldesignet gør, at belastningen på sejlet fordeles mere effektivt og dermed holder sejlet bedre sin form. Panelerne i det radiale layout er nøje placeret i forhold til belastningen for at opnå den bedste stabilitet. Medvindssejl i trioptimal layout er typisk lavet af et laminat, der er en sandwich dug bestående af flere lag. Men det trioptimale layout anvendes også til modvindssejl, der typisk fremstilles af nylon.
  • EPEX
    EPEX er vores unikke og patenterede membran teknologi, vores flagskib. Et 100 % custom- design, hvor hver enkelt tråd lægges ud nøjagtigt i forhold til designet af hver enkelt sejl. Det giver den helt optimale fordeling af belastningen på sejlet, der får en enestående form-stabilitet og ydeevne. En bredspektret udvalg af tråde giver et utal af kombinationsmuligheder, der møder ethvert behov. Materialerne i en EPEX membran presses sammen under ekstrem og ensartet vakuum og efterfølgende laminering.

Udforsk vores sejl

Udforsk vores sejl
Hvilken type sejl er du interesseret i ?
Hvilket layout?
Se de forskellige materialekombinationer

Furling Genoa - Woven Polyester, Cruising Dacron

This furling genoa is made from a tightly woven polyester cloth, keeping the nice white look for years and years to come. The cross-cut sail design is a widely used design that is a very price conscious choice. You have options to add a reef compensator which flattens the sail as it is furled which makes the sail more efficient when reefed, and UV protection in leech and foot for a longer lasting sail.

Material

The woven polyester used for our ALISIO segment is a durable and economical fabric ideal for recreational cruising.

 

Performance - Holdbarhed - Pris

Indikatorerne for performance, holdbarhed og pris er vist for hver eneste materialekombination, på en skala fra 1-10, hvor 10 er det højeste.

Andre forsejl

Er det ovenstående forsejl ikke det, du søger? Så tjek alle de andre forsejl i vores ALISIO segment her.

  • Jib - no battens
  • Jib - short battens
  • Furling Jib - no battens
  • Selftacking Jib
  • Self-tacking Furling Jib
  • Genoa
  • Jib - no battens

    Jib - no battens

    Sail Type
    The all-round jib is the working headsail for upwind sailing in most wind conditions when there is no furling gear to handle the sail. It is sheeted in front of the shrouds which gives the possibility of being trimmed with a narrow sheeting angle.

    Some options are e.g. trim stripes, different clew and tack attachments, race head and foil bag. A reef could also be fitted to this sail as that will reduce the area to a typical heavy weather jib area.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The all-round jib can be used in most wind conditions.
  • Jib - short battens

    Jib - short battens

    Sail Type
    The all-round jib is the working headsail for upwind sailing in most wind conditions when there is no furling gear to handle the sail. It is sheeted in front of the shrouds which gives the possibility of being trimmed with a narrow sheeting angle.

    The sail may be with or without battens. If you choose battens, normally the top batten will be full and the lower ones short. A sail with battens will be wider in the upper parts and thus more efficient.

    Some other options are e.g. trim stripes, different clew and tack attachments, race head and foil bag. A reef could also be fitted to this sail as that will reduce the area to a typical heavy weather jib area.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The all-round jib can be used in most wind conditions.
  • Furling Jib - no battens

    Furling Jib - no battens

    Sail Type
    The furling jib is the working headsail for upwind sailing in most wind conditions. It is sheeted in front of the shrouds which gives the opportunity of being trimmed with a narrow sheeting angle.

    The sail may be with or without battens. If you choose battens, they will be parallel with the forestay to make the furling work perfectly. A sail with battens will be slightly bigger than without battens. Some other options are trim stripes, different clew attachments, UV cover in foot and leech.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The all-round furling jib can be used in most wind conditions.
  • Selftacking Jib

    Selftacking Jib

    Sail Type
    The self-tacking jib is the working headsail for upwind in most wind conditions when there is no furling gear to handle the sail, and you are going to sheet it on your self-tacking track.

    The sail may be with or without battens. If you choose battens, normally the top batten will be full and the lower ones short. A sail with battens will be wider in the upper parts and thus more efficient. For many boats/rigs the self-tacking jib may be small in light conditions. A Code 0 sail could in other words be very good to combine with the self-tacker to be able to fully enjoy the sailing in all conditions.

    In addition to battens, other options are e.g. clew board, trim stripes, different tack attachments and race head foil bag.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The self-tacking jib can be used in most wind conditions.
  • Self-tacking Furling Jib

    Self-tacking Furling Jib

    Sail Type
    The self-tacking furling jib is the working headsail for upwind in most wind conditions when the usage is handled with furling gear. The sail is sheeted on your self-tacking track.

    The sail may be with or without battens. If you choose battens, they will be parallel with the forestay to make the furling work perfectly. A sail with battens will be slightly bigger than without.

    For many boats/rigs the self-tacking jib may be small in light conditions. A Code 0 sail could in other words be very good to combine with the self-tacker to be able to fully enjoy the sailing in all conditions.

    In addition to battens other options are e.g. clew board, trim stripes and UV cover in foot and leech.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The self-tacking furling jib can be used in most wind conditions.
  • Genoa

    Genoa

    Sail Type
    The genoa is a sail that overlaps the mast. Normally the LP (perpendicular measurement from clew to luff) is between 135- 150% of the boats J-measurement. This makes the sail efficient in light and medium winds.

    Since the sail overlaps the rig, battens are not possible. The luff can be attached to the forestay with foil, metal hooks or soft hanks of different types.

    Some of the options available are e.g. different tack and clew attachments, telltale windows, trim stripes and race zipperbag.

    Layout
    The sail is available in crosscut, trioptimal and EPEX.

    When to use
    The genoa is efficient in light and medium winds.

Få mere info og tilbud

Alisio Gallery