• Marin

    Det er din livstil! Du søger det bedste fra begge verdener
    - uanset om du er på vej på sommertur eller er med til klub-
    stævne, så er MARIN det rigtige valg til dig. Udforsk nye
    nye bugter og nye havne med fuld tillid til dine sejl. Grib
    øjeblikket! Med holdbarhed og performance i én og samme løsning.

Forskellige layouts

  • X-CUT
  • TRIOPT
  • EPEX
  • X-CUT
    Et crosscut (x-cut) sejl består af et antal horisontale parallelle paneler i lodret linje mod agterliget. Det er en effektiv og økonomisk måde at producere holdbare sejl på. Som det første sejldesign på markedet har det bevist sit værd. Crosscut sejl fremstilles typisk af vævet polyester dug med lige skudtråde, der er stærkere end kædetrådene. De stærke skudtråde ligger i belastningsretningen af sejlet og giver dermed et meget holdbart sejl.
  • TRIOPT
    Det trioptimale layout går også under navnet radial, da panelerne er radiale mod hjørnerne af sejlet, der giver den triangulære facon. Sejldesignet gør, at belastningen på sejlet fordeles mere effektivt og dermed holder sejlet bedre sin form. Panelerne i det radiale layout er nøje placeret i forhold til belastningen for at opnå den bedste stabilitet. Medvindssejl i trioptimal layout er typisk lavet af et laminat, der er en sandwich dug bestående af flere lag. Men det trioptimale layout anvendes også til modvindssejl, der typisk fremstilles af nylon.
  • EPEX
    EPEX er vores unikke og patenterede membran teknologi, vores flagskib. Et 100 % custom- design, hvor hver enkelt tråd lægges ud nøjagtigt i forhold til designet af hver enkelt sejl. Det giver den helt optimale fordeling af belastningen på sejlet, der får en enestående form-stabilitet og ydeevne. En bredspektret udvalg af tråde giver et utal af kombinationsmuligheder, der møder ethvert behov. Materialerne i en EPEX membran presses sammen under ekstrem og ensartet vakuum og efterfølgende laminering.

Udforsk vores sejl

Udforsk vores sejl
Hvilken type sejl er du interesseret i ?
Hvilket layout?
Se de forskellige materialekombinationer

EMS Furling Main - Woven Polyester, Dacron AP

The classic cross-cut construction is a widely used design that allows a competitive price. This construction is a good choice for an in-mast furling mainsail when looking for longevity at a good price.  Available in both the well-known woven polyester (dacron) and the more stable and stronger woven dyneema (hydra net). The continuous vertical battens with carbon top provide support for the leech, whether the sail is fully deployed or reefed. The battens are also to be used as reefing points, stretching the reefed luff and making the sail flat and efficient.

Material

The woven polyester used for our MARIN segment comes in different qualities with high tenacity fibers that resist long term loads. Ranging from an all-round Dacron cloth to high-quality cloth with improved stretch resistance.

 

Performance - Holdbarhed - Pris

Performance, durability and price indicators are illustrated for each material combination on a scale from 1-10, 10 being the highest.

Andre storsejl

Er det ovenstående storsejl ikke det, du søger? Så tjek alle de andre storsejl i vores MARIN segment her.

  • Conventional Main - short battens
  • Conventional Main - full battens
  • In-Mast Furling Main - no battens
  • In-Mast Furling Main - short battens
  • FatHead Main
  • Try Sail
  • Conventional Main - short battens

    Conventional Main - short battens

    Sail Type
    The conventional mainsail with short battens still has full top batten. Having shorter battens in the lower parts of the sail makes the trimming and depowering easier. Short battens also make the sail weigh less and is normally the preferred choice for racing. Short battens also mean less chafe against the rig and spreaders when sailing downwind, so it should be considered if you plan to cross the oceans and sail downwind for long distances.

    The sail can be delivered with slides or luff rope, reefs and all other necessary options, for instance: trim stripes, sail numbers, cunningham, over-head leech line, loose foot and sail bag.

    Layout
    Available in cross-cut, trioptimal and EPEX.

    When to use
    The conventional mainsail with short battens can be used in all weather conditions – upwind and downwind. For heavy wind conditions the sail area can be reduced by reefing.
  • Conventional Main - full battens

    Conventional Main - full battens

    Sail Type
    The horizontal full battens in the conventional mainsail help keep the shape of the sail, and when lowering the sail, it practically packs itself into the lazy jack or zippack. As the sail is easy to use and stable, it is a favorite sail for many cruisers.

    The sail can be delivered with slides or luff rope, reefs and all other necessary options, for instance: trim stripes, sail numbers, cunningham, over-head leech line, loose foot and sail bag.

    Layout
    Available in cross-cut, trioptimal and EPEX.

    When to use
    The conventional mainsail with full battens can be used in all weather conditions – upwind and downwind. For heavy wind conditions the sail area can be reduced by reefing.
  • In-Mast Furling Main - no battens

    In-Mast Furling Main - no battens

    Sail Type
    This is the simplest in mast furling mainsail. Cost effective and solid are the most important features. It is possible to furl into all furling masts, also the ones with a narrow opening.

    Normal options to include are clew block, clew UV cover, reefing marks and sail bag. Sail number, trim stripes and other options are also available.

    Layout
    Available in cross-cut, trioptimal and EPEX.

    When to use
    The in-mast furling mainsail with no battens can be used in all weather conditions – upwind and downwind. For heavy wind conditions the sail area can be reduced by furling in the sail partly.
  • In-Mast Furling Main - short battens

    In-Mast Furling Main - short battens

    Sail Type
    This in-mast furling mainsail with short battens can be built with a straight leech which gives a larger and more efficient sail than without the battens.

    Normally this sail will also fit into all masts, also the ones with narrow opening, as the battens are flat. It is a cost effective and solid sail. Normal options to include are clew block, clew UV cover, reefing marks and sail bag. Sail number, trim stripes and other options are also available.

    Layout
    Available in cross-cut, trioptimal and EPEX

    When to use
    The in-mast furling mainsail with short battens can be used in all weather conditions – upwind and downwind. For heavy wind conditions the sail area can be reduced by furling in the sail partly.
  • FatHead Main

    FatHead Main

    Sail Type
    A fathead mainsail is designed with a square head, making the tuning easier. When the wind increases, the top of the sail will twist, and the result is a flatter sail. In light wind the extra area gives the boat more power.

    The square head mainsail is with full battens, which in addition to making the sail stable when sailing also makes the sail pack itself when lowering it in to your zippack.

    Normal options to include are reefs prepared for single line or hook, slides, loose foot, sail number, trim stripes, cunningham, smart solutions for easy control of the fat head while hoisting and packing, but other options are also available.

    Layout
    Available in crosscut, trioptimal and EPEX.

    When to use
    The fathead mainsail can be used in all weather conditions – upwind and downwind. For heavy wind conditions the sail can be reefed.
  • Try Sail

    Try Sail

    The trysail is your storm mainsail which is designed to give the boat balance when combined with a small headsail. It is a narrow no batten sail that will not affect the mast in any negative way and is also designed without the usage of the boom.

    Layout
    Available in cross-cut.

Få mere info og tilbud

Marin Gallery